RoHS tester

1. Inspect each batch of incoming materials to ensure that the materials meet the requirements of ROHS standard

2. Rohs6 major items and halogens can be tested

Color recognizer

Color detection shall be carried out for products with more than monochrome, one end wearing plastic shell and one end open

Wire tester

1. The instrument voltage can be up to 750V
2. Measurable AC (500V)
3. The on impedance value can be 0.5ohm
4. The insulation value can reach 100 MOhm

High power magnifying glass

1. Used for internal dimension projection of materials or parts
2. It is used for product analysis with a magnification of 50 times

RF tester

Insulation impedance

Horizontal and vertical combustion tester

It is applicable to inspect and evaluate the combustion characteristics of plastic materials according to iec60695-11-4, iec60695-11-10, iec60695-11-3, iec60695-11-20 and iec60695-11-2. Relevant clauses specified in American UL94 standard flammability test of plastic materials for equipment and appliance parts.

Hot wire tester

According to iec60695-2-10:2000, GB / t5169.10-2006, GB / t5169.13-2006 and gb4706.1 standards, it is used for fire hazard test of electrical and electronic products, household appliances and their materials to simulate the thermal stress caused by heat sources or ignition sources such as burning elements or overload resistors in a short time.

High and low temperature tester

It is used to simulate the adaptability and characteristics of the product under the condition of high temperature and high humidity, and to test the reliability and temperature and humidity environment.

Temperature range: high temperature: 150 ℃ / low temperature: (A: + 25 ℃; B: 0 ℃; C: - 20 ℃; D: - 40 ℃; E: - 60 ℃; F: - 70 ℃)